PartsTable
Technical Data Sheet
Download PDF

S6110-23017-1 — WASHER,KEY

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S6110-23017-1: WASHER,KEY.

The WASHER,KEY is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, hole_diameter: 2.781 INCHES MINIMUM AND 2.791 INCHES MAXIMUM IN, outside_diameter: 3.031 INCHES MINIMUM AND 3.051 INCHES MAXIMUM IN, special_features: EXTERNAL KEYS PRE-BENT 45 DEGREES, style_designator: KEY, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-019-1583, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6110-23017-1
NSN: 5310-00-019-1583
FSC: 5310 — Nuts and Washers
CAGE: 54878 — ROTAIR AEROSPACE CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
hole_diameter2.781 INCHES MINIMUM AND 2.791 INCHES MAXIMUM IN
outside_diameter3.031 INCHES MINIMUM AND 3.051 INCHES MAXIMUM IN
special_featuresEXTERNAL KEYS PRE-BENT 45 DEGREES
style_designatorKEY
surface_treatmentPASSIVATE OVERALL
material_thickness0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
width_between_flats2.516 INCHES MINIMUM AND 2.519 INCHES MAXIMUM IN
external_key_quantity17
external_straight_key_width0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
overall_distance_including_keys3.454 INCHES MINIMUM AND 3.484 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-5059 COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-019-1583
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S6110-23017-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DISTANCE INCLUDING KEYS: 3.454 INCHES MINIMUM AND 3.484 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: KEY
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 3.031 INCHES MINIMUM AND 3.051 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
WIDTH BETWEEN FLATS: 2.516 INCHES MINIMUM AND 2.519 INCHES MAXIMUM IN
•
EXTERNAL STRAIGHT KEY WIDTH: 0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
•
EXTERNAL KEY QUANTITY: 17
TECHNICAL CHARACTERISTICS
OVERALL DISTANCE INCLUDING KEYS3.454 INCHES MINIMUM AND 3.484 INCHES MAXIMUM IN
STYLE DESIGNATORKEY
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER3.031 INCHES MINIMUM AND 3.051 INCHES MAXIMUM IN
MATERIAL THICKNESS0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS2.516 INCHES MINIMUM AND 2.519 INCHES MAXIMUM IN
EXTERNAL STRAIGHT KEY WIDTH0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
EXTERNAL KEY QUANTITY17
SPECIAL FEATURESEXTERNAL KEYS PRE-BENT 45 DEGREES
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S6110-23017-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6110-23017-1?
S6110-23017-1 is a WASHER,KEY.
What is the NSN for S6110-23017-1?
S6110-23017-1 is cataloged in the U.S. Government catalog under NSN 5310-00-019-1583. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6110-23017-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.