PartsTable
Technical Data Sheet
Download PDF

S6110-21086 — LOCKING PLATE,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S6110-21086: LOCKING PLATE,NUT AND BOLT.

The LOCKING PLATE,NUT AND BOLT is a the manufacturer industrial component. Key specifications include width: 0.675 INCHES NOMINAL IN, material: STEEL COMP 302 OR STEEL COMP 301, end_radius: 0.008 INCHES NOMINAL IN, plate_thickness: 0.015 INCHES NOMINAL IN, style_designator: RADIUS, mounting_hole_diameter: 0.516 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-674-9482, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6110-21086
NSN: 5340-00-674-9482
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
width0.675 INCHES NOMINAL IN
materialSTEEL COMP 302 OR STEEL COMP 301
end_radius0.008 INCHES NOMINAL IN
plate_thickness0.015 INCHES NOMINAL IN
style_designatorRADIUS
mounting_hole_diameter0.516 INCHES NOMINAL IN
cross-sectional_shape_styleFLAT
material_document_and_classificationMIL-S-5059, COMP 302 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-5059, TYPE 301 MIL SPEC 2ND MATERIAL RESPONSE
distance_between_mounting_hole_centers2.500 INCHES NOMINAL IN
NSN5340-00-674-9482
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S6110-21086 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.015 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 2.500 INCHES NOMINAL IN
•
END RADIUS: 0.008 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RADIUS
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059, COMP 302 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-5059, TYPE 301 MIL SPEC 2ND MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.516 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
WIDTH: 0.675 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.015 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS2.500 INCHES NOMINAL IN
END RADIUS0.008 INCHES NOMINAL IN
STYLE DESIGNATORRADIUS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059, COMP 302 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-5059, TYPE 301 MIL SPEC 2ND MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.516 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT
WIDTH0.675 INCHES NOMINAL IN
MATERIALSTEEL COMP 302 OR STEEL COMP 301
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S6110-21086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6110-21086?
S6110-21086 is a LOCKING PLATE,NUT AND BOLT.
What is the NSN for S6110-21086?
S6110-21086 is cataloged in the U.S. Government catalog under NSN 5340-00-674-9482. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6110-21086

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.