PartsTable
Technical Data Sheet
Download PDF

S60-163 — PLUG,EXPANSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S60-163: PLUG,EXPANSION.

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include radius: 2.360 INCHES NOMINAL IN, material: ALUMINUM ALLOY, outside_diameter: 2.245 INCHES MINIMUM AND 2.255 INCHES MAXIMUM IN, style_designator: CONCAVE, surface_treatment: ANODIZE, material_thickness: 0.040 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-485-7527, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S60-163
NSN: 5340-00-485-7527
FSC: 5340 — Hardware, Commercial
CAGE: 6K4C8 — GOODRICH CORPORATION (USA)
SPECIFICATIONS
radius2.360 INCHES NOMINAL IN
materialALUMINUM ALLOY
outside_diameter2.245 INCHES MINIMUM AND 2.255 INCHES MAXIMUM IN
style_designatorCONCAVE
surface_treatmentANODIZE
material_thickness0.040 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-485-7527
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S60-163 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIUS: 2.360 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.245 INCHES MINIMUM AND 2.255 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CONCAVE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE
•
MATERIAL: ALUMINUM ALLOY
TECHNICAL CHARACTERISTICS
RADIUS2.360 INCHES NOMINAL IN
OUTSIDE DIAMETER2.245 INCHES MINIMUM AND 2.255 INCHES MAXIMUM IN
STYLE DESIGNATORCONCAVE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE
MATERIALALUMINUM ALLOY
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S60-163?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S60-163?
S60-163 is a PLUG,EXPANSION.
What is the NSN for S60-163?
S60-163 is cataloged in the U.S. Government catalog under NSN 5340-00-485-7527. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S60-163

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.