PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S5FCHH5
S5FCHH5 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C OUTER RING, bore_shape: STRAIGHT, flange_width: 0.0310 INCHES NOMINAL IN, bore_diameter: 0.0937 INCHES NOMINAL IN, overall_width: 0.1406 INCHES NOMINAL IN, alignment_type: RIGID. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-180-4822, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S5FCHH5
NSN: 3110-01-180-4822
FSC: 3110
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)
SPECIFICATIONS
materialSTEEL COMP 440C OUTER RING
bore_shapeSTRAIGHT
flange_width0.0310 INCHES NOMINAL IN
bore_diameter0.0937 INCHES NOMINAL IN
overall_width0.1406 INCHES NOMINAL IN
alignment_typeRIGID
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_features500 DEG STANDARD OPERATING TEMP
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
NSN3110-01-180-4822
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S5FCHH5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
OUTER RING OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
FLANGE OUTSIDE DIAMETER: 0.3590 INCHES NOMINAL IN
•
FLANGE WIDTH: 0.0310 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
OUTER RING OUTSIDE DIAMETER0.3125 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
FLANGE OUTSIDE DIAMETER0.3590 INCHES NOMINAL IN
FLANGE WIDTH0.0310 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
SPECIAL FEATURES25 PCT FULL OF SPECIFIED LUBRICANT
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONABEC NO.3
SHIELD QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
S326Interchangeable
interchangeable cross-reference
interchangeable
7341456Interchangeable
interchangeable cross-reference
interchangeable
521-G251Interchangeable
interchangeable cross-reference
interchangeable
521PInterchangeable
interchangeable cross-reference
interchangeable
S 3264Interchangeable
interchangeable cross-reference
interchangeable
SFR1-55PPK18/168Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S5FCHH5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S5FCHH5?
S5FCHH5 is a BEARING,BALL,ANNULAR.
What parts can replace S5FCHH5?
There are 14 known substitutes for S5FCHH5: S326, 7341456, 521-G251 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S5FCHH5?
S5FCHH5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-180-4822. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S5FCHH5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026