PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S5632CZH5P58LO2DB2.5
S5632CZH5P58LO2DB2.5 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The S5632CZH5P58LO2DB2.5 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-5080, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S5632CZH5P58LO2DB2.5
NSN: 3110-00-151-5080
FSC: 3110
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)
SPECIFICATIONS
Part NumberS5632CZH5P58LO2DB2.5
NSN3110-00-151-5080
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S5632CZH5P58LO2DB2.5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
MATERIAL: STEEL COMP 440C BALL
•
SHIELD QUANTITY: 1
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
TECHNICAL CHARACTERISTICS (FLIS)
BEARING SEAL TYPECONTACT
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
MATERIALSTEEL COMP 440C BALL
SPECIAL FEATURESPAIR OF BEARINGS FLUSH GROUND FOR DUPLEX MOUNTING W/SHIELDED SIDES TOGETHER,ECCENTRICALLY MATCHED AND MARKED AT THE OUTER RING
SHIELD QUANTITY1
SURFACE FINISHGROUND
MATERIALSTEEL COMP 410 RETAINER
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
STANDARD TOLERANCE DESIGNATIONABEC NO. 5P
INTERNAL CLEARANCE0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
104922Interchangeable
interchangeable cross-reference
interchangeable
3244263Interchangeable
interchangeable cross-reference
interchangeable
3216465Interchangeable
interchangeable cross-reference
interchangeable
CCS1136Interchangeable
interchangeable cross-reference
interchangeable
PF936Interchangeable
interchangeable cross-reference
interchangeable
P136Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S5632CZH5P58LO2DB2.5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S5632CZH5P58LO2DB2.5?
S5632CZH5P58LO2DB2.5 is a S5632CZH5P58LO2DB2.5.
What parts can replace S5632CZH5P58LO2DB2.5?
There are 16 known substitutes for S5632CZH5P58LO2DB2.5: 104922, 3244263, 3216465 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S5632CZH5P58LO2DB2.5?
S5632CZH5P58LO2DB2.5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-5080. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S5632CZH5P58LO2DB2.5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026