PartsTable
Technical Data Sheet
Download PDF

S5600H3234968PC10-1 — RING,WEARING

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

S5600H3234968PC10-1: RING,WEARING.

The RING,WEARING is a the manufacturer industrial component. Key specifications include material: STEEL, body_style: EXTERNAL LOCKING FLANGE, corner_shape: SQUARE ALL CORNERS, overall_length: 3.000 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES ALL SURFACES, special_features: 5 RH GROOVES PER IN. 0.062 IN.

W BY 0.062 IN. DEEP SQUARE CUT ON ID IN. This part is cataloged in the U.S.

Government catalog under NSN 4320-00-308-6723, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S5600H3234968PC10-1
NSN: 4320-00-308-6723
FSC: 4320 — Power and Hand Pumps
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL
body_styleEXTERNAL LOCKING FLANGE
corner_shapeSQUARE ALL CORNERS
overall_length3.000 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES ALL SURFACES
special_features5 RH GROOVES PER IN. 0.062 IN. W BY 0.062 IN. DEEP SQUARE CUT ON ID IN
anchor_flange_width0.560 INCHES NOMINAL IN
body_inside_diameter3.595 INCHES NOMINAL IN
body_outside_diameter5.499 INCHES NOMINAL IN
end_to_flange_distance1.188 INCHES NOMINAL IN
center_flange_thickness0.622 INCHES NOMINAL IN
distance_below_centerline0.125 INCHES NOMINAL IN
NSN4320-00-308-6723
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RING,WEARING TITLE COMPONENT PN S5600H3234968PC10-1 MFR RING,WEARING
KEY FEATURES
•
CENTER FLANGE THICKNESS: 0.622 INCHES NOMINAL IN
•
SURFACE FINISH: 125.0 MICROINCHES ALL SURFACES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
ANCHOR FLANGE WIDTH: 0.560 INCHES NOMINAL IN
•
BODY STYLE: EXTERNAL LOCKING FLANGE
•
BODY OUTSIDE DIAMETER: 5.499 INCHES NOMINAL IN
•
END TO FLANGE DISTANCE: 1.188 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-16993 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
CENTER FLANGE THICKNESS0.622 INCHES NOMINAL IN
SURFACE FINISH125.0 MICROINCHES ALL SURFACES
CORNER SHAPESQUARE ALL CORNERS
ANCHOR FLANGE WIDTH0.560 INCHES NOMINAL IN
BODY STYLEEXTERNAL LOCKING FLANGE
BODY OUTSIDE DIAMETER5.499 INCHES NOMINAL IN
END TO FLANGE DISTANCE1.188 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-16993 MIL SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH3.000 INCHES NOMINAL IN
DISTANCE BELOW CENTERLINE0.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 4
S5600H3234968Reference document
Same NSN cross-reference
Reference document — Secondary reference
3F3664-10-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
3F3664Reference document
Same NSN cross-reference
Reference document — Secondary reference
3F-3664,PC.10-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S5600H3234968PC10-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S5600H3234968PC10-1?
S5600H3234968PC10-1 is a RING,WEARING.
What parts can replace S5600H3234968PC10-1?
There are 4 known substitutes for S5600H3234968PC10-1: S5600H3234968, 3F3664-10-1, 3F3664 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S5600H3234968PC10-1?
S5600H3234968PC10-1 is cataloged in the U.S. Government catalog under NSN 4320-00-308-6723. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S5600H3234968PC10-1