PartsTable
Technical Data Sheet
Download PDF

S533G10 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S533G10: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, material_diameter: 0.030 INCHES NOMINAL IN, loop_inside_diameter: 0.625 INCHES NOMINAL IN, distance_from_loop_center_to_tongue_end: 1.160 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-553-0238, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S533G10
NSN: 5340-01-553-0238
FSC: 5340 — Hardware, Commercial
CAGE: 18076 — UMPCO, INC. DBA UMPCO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
material_diameter0.030 INCHES NOMINAL IN
loop_inside_diameter0.625 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.160 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.850 INCHES NOMINAL IN
NSN5340-01-553-0238
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S533G10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.030 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.160 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.850 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
LOOP INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DIAMETER0.030 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
OVERALL WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.160 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.850 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
LOOP INSIDE DIAMETER0.625 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
83AX881Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
25094540Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S533G10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S533G10?
S533G10 is a CLAMP,LOOP.
What parts can replace S533G10?
There are 2 known substitutes for S533G10: 83AX881, 25094540. Substitute compatibility should be verified for your specific system.
What is the NSN for S533G10?
S533G10 is cataloged in the U.S. Government catalog under NSN 5340-01-553-0238. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S533G10