PartsTable
Technical Data Sheet
Download PDF

S518CZH5P25LY196 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

S518CZH5P25LY196: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC AND GLASS FIBER SEAL, bore_shape: STRAIGHT, bore_diameter: 0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN, overall_width: 0.1396 INCHES MINIMUM AND 0.1406 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-294-1729, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S518CZH5P25LY196
NSN: 3110-01-294-1729
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC AND GLASS FIBER SEAL
bore_shapeSTRAIGHT
bore_diameter0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
overall_width0.1396 INCHES MINIMUM AND 0.1406 INCHES MAXIMUM IN
seal_quantity1
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
surface_treatmentPASSIVATE OVERALL
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
NSN3110-01-294-1729
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S518CZH5P25LY196 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 1
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY1
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE BALL
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE RETAINER
SUBSTITUTES & CROSS-REFERENCES 1
10862-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S518CZH5P25LY196?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S518CZH5P25LY196?
S518CZH5P25LY196 is a BEARING,BALL,ANNULAR.
What parts can replace S518CZH5P25LY196?
There is 1 known substitute for S518CZH5P25LY196: 10862-2. Substitute compatibility should be verified for your specific system.
What is the NSN for S518CZH5P25LY196?
S518CZH5P25LY196 is cataloged in the U.S. Government catalog under NSN 3110-01-294-1729. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S518CZH5P25LY196