S500-31 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

S500-31: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 321 OR STEEL COMP 347 BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-406-8985, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

S500-31

NSN: 5340-01-406-8985
FSC: 5340 — Hardware, Commercial
CAGE: 18076 — UMPCO, INC. DBA UMPCO INC (USA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	STEEL COMP 321 OR STEEL COMP 347 BAND
overall_width	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
loop_inside_diameter	1.938 INCHES NOMINAL IN
environmental_attribute_code	ASBESTOS ALTERNATIVE PRODUCTS
material_document_and_classification	AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5512 ASSN STD 2ND MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.687 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	1.439 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
NSN	5340-01-406-8985

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5512 ASSN STD 2ND MATERIAL RESPONSE BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.687 INCHES NOMINAL IN

•

ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5512 ASSN STD 2ND MATERIAL RESPONSE BAND
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.687 INCHES NOMINAL IN
ENVIRONMENTAL ATTRIBUTE CODE	ASBESTOS ALTERNATIVE PRODUCTS
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.439 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 321 OR STEEL COMP 347 BAND

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

490-31RPBSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

BACC10HS31 NON-ASBESTOSSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy S500-31?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is S500-31?

S500-31 is a CLAMP,LOOP.

What parts can replace S500-31?

There are 2 known substitutes for S500-31: 490-31RPB, BACC10HS31 NON-ASBESTOS. Substitute compatibility should be verified for your specific system.

What is the NSN for S500-31?

S500-31 is cataloged in the U.S. Government catalog under NSN 5340-01-406-8985. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

S500-31 — CLAMP,LOOP

Request a Quote — S500-31