PartsTable
Technical Data Sheet
Download PDF

S500-06 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S500-06: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, overall_width: 0.50 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.032 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: CLAMP,LOOP,SUPPORT, center_to_center_distance_between_loop_and_mounting_hole: 0.94 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-676-3806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S500-06
NSN: 5340-01-676-3806
FSC: 5340 — Hardware, Commercial
CAGE: 18076 — UMPCO, INC. DBA UMPCO INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
overall_width0.50 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.032 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyCLAMP,LOOP,SUPPORT
center_to_center_distance_between_loop_and_mounting_hole0.94 INCHES MAXIMUM IN
NSN5340-01-676-3806
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S500-06 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.94 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.50 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP,LOOP,SUPPORT
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.94 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S500-06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S500-06?
S500-06 is a CLAMP,LOOP.
What is the NSN for S500-06?
S500-06 is cataloged in the U.S. Government catalog under NSN 5340-01-676-3806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S500-06