PartsTable
Technical Data Sheet
Download PDF

S492-8 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S492-8: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: HEXAGON, nut_height: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-924-5923, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S492-8
NSN: 5310-00-924-5923
FSC: 5310 — Nuts and Washers
CAGE: 28968 — CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. DBA HOKE GYROLOK (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleHEXAGON
nut_height0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL NUT
width_across_flats0.871 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
nominal_thread_size0.750 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch27
material_document_and_classificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-924-5923
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S492-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.871 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NUT HEIGHT: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 90.0 DEGREES NOMINAL NUT
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.871 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NUT HEIGHT0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
COUNTERSINK ANGLE90.0 DEGREES NOMINAL NUT
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH27
SUBSTITUTES & CROSS-REFERENCES 2
2HL599Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
Y492-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S492-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S492-8?
S492-8 is a NUT,PLAIN,HEXAGON.
What parts can replace S492-8?
There are 2 known substitutes for S492-8: 2HL599, Y492-8. Substitute compatibility should be verified for your specific system.
What is the NSN for S492-8?
S492-8 is cataloged in the U.S. Government catalog under NSN 5310-00-924-5923. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S492-8