PartsTable
Technical Data Sheet
Download PDF

S484-6 — WASHER,FINISHING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S484-6: WASHER,FINISHING.

The WASHER,FINISHING is a the manufacturer industrial component. Key specifications include cushion: INCLUDED, material: STEEL COMP 301 LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.500 INCHES NOMINAL IN, style_designator: TWO HOLE SINGLE ARCH, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-651-6083, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S484-6
NSN: 5310-00-651-6083
NIINs: 006516083, 012876192
FSC: 5310 — Nuts and Washers
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
cushionINCLUDED
materialSTEEL COMP 301 LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.500 INCHES NOMINAL IN
style_designatorTWO HOLE SINGLE ARCH
material_thickness0.032 INCHES NOMINAL IN
mounting_hole_size0.204 INCHES NOMINAL IN
material_document_and_classificationAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHIONING
NSN5310-00-651-6083
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S484-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAT TREATMENT: T-6 SOLUTION HEAT TREATED, ARTIFICALLY AGED
•
STYLE DESIGNATOR: FINISHING
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/13,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.560 INCHES NOMINAL IN
•
RECESS DIAMETER: 0.377 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 7075 OVERALL
•
HOLE DIAMETER: 0.190 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.072 INCHES NOMINAL IN
HEAT TREATMENTT-6 SOLUTION HEAT TREATED, ARTIFICALLY AGED
STYLE DESIGNATORFINISHING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/13,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.560 INCHES NOMINAL IN
RECESS DIAMETER0.377 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 7075 OVERALL
HOLE DIAMETER0.190 INCHES NOMINAL IN
RECESS ANGLE115.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S484-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S484-6?
S484-6 is a WASHER,FINISHING.
What is the NSN for S484-6?
S484-6 is cataloged in the U.S. Government catalog under NSN 5310-00-651-6083. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S484-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.