PartsTable / COMPONENT / S4815
S4815
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN, housing_bore_diameter: 1.374 INCHES MINIMUM AND 1.376 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-970-4271, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
S4815
NSN: 5330-00-970-4271 FSC: 5330 CAGE: 91251 — FREUDENBERG-NOK GENERAL PARTNERSHIP DBA FREDENBERG-NOK SEALS DIVISION (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN housing_bore_diameter 1.374 INCHES MINIMUM AND 1.376 INCHES MAXIMUM IN sealing_element_style ANGULAR accommodated_shaft_diameter 0.625 INCHES NOMINAL IN material_document_and_classification 4806-2 FSCM 91251 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT NSN 5330-00-970-4271
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: S4815
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEAL WIDTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
• MATERIAL DOCUMENT AND CLASSIFICATION: 4806-2 FSCM 91251 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT
• ACCOMMODATED SHAFT DIAMETER: 0.625 INCHES NOMINAL IN
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• SEALING ELEMENT STYLE: ANGULAR
• HOUSING BORE DIAMETER: 1.374 INCHES MINIMUM AND 1.376 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN MATERIAL DOCUMENT AND CLASSIFICATION 4806-2 FSCM 91251 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT ACCOMMODATED SHAFT DIAMETER 0.625 INCHES NOMINAL IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT CASE STYLE SQUARE SEALING ELEMENT STYLE ANGULAR HOUSING BORE DIAMETER 1.374 INCHES MINIMUM AND 1.376 INCHES MAXIMUM IN MATERIAL STEEL COMP 302 CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
1960920-1 Interchangeable interchangeable cross-reference
interchangeable
4815 Interchangeable interchangeable cross-reference
interchangeable
V1150N Interchangeable interchangeable cross-reference
interchangeable
3131144 Interchangeable interchangeable cross-reference
interchangeable
07-0308 Interchangeable interchangeable cross-reference
interchangeable
6002-424 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy S4815?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S4815?
S4815 is a SEAL,PLAIN ENCASED.
What parts can replace S4815?
There are 7 known substitutes for S4815: 1960920-1, 4815, V1150N and 4 more. Substitute compatibility should be verified for your specific system.
Is S4815 still available?
S4815 is currently cancelled.