S463-G18 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

S463-G18: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 BAND, slot_width: 0.281 INCHES NOMINAL IN, slot_length: 0.406 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: OBLONG. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-339-7022, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

S463-G18

NSN: 5340-01-339-7022
FSC: 5340 — Hardware, Commercial
CAGE: 18076 — UMPCO, INC. DBA UMPCO INC (USA)

SPECIFICATIONS

material	STEEL COMP 1010 BAND
slot_width	0.281 INCHES NOMINAL IN
slot_length	0.406 INCHES NOMINAL IN
overall_width	0.625 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
tongue_hole_type	OBLONG
surface_treatment	CADMIUM BAND
material_thickness	0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
loop_inside_diameter	1.125 INCHES NOMINAL IN
material_document_and_classification	AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
center_to_center_distance_between_loop_and_mounting_hole	1.081 INCHES MINIMUM AND 1.111 INCHES MAXIMUM IN
NSN	5340-01-339-7022

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION

•

MATERIAL THICKNESS: 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN

•

SURFACE TREATMENT: CADMIUM BAND

•

TONGUE HOLE TYPE: OBLONG

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.081 INCHES MINIMUM AND 1.111 INCHES MAXIMUM IN

•

MATERIAL: STEEL COMP 1010 BAND

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
OVERALL WIDTH	0.625 INCHES NOMINAL IN
MATERIAL THICKNESS	0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
SURFACE TREATMENT	CADMIUM BAND
TONGUE HOLE TYPE	OBLONG
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.081 INCHES MINIMUM AND 1.111 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 1010 BAND
MATERIAL	RUBBER CHLOROPRENE CLASS CR CUSHION
SLOT WIDTH	0.281 INCHES NOMINAL IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

JM55LC6S-18Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

864CS18Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy S463-G18?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is S463-G18?

S463-G18 is a CLAMP,LOOP.

What parts can replace S463-G18?

There are 2 known substitutes for S463-G18: JM55LC6S-18, 864CS18. Substitute compatibility should be verified for your specific system.

What is the NSN for S463-G18?

S463-G18 is cataloged in the U.S. Government catalog under NSN 5340-01-339-7022. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

S463-G18 — CLAMP,LOOP

Request a Quote — S463-G18