PartsTable
Technical Data Sheet
Download PDF

S4506614-7200 — LEAF,BUTT HINGE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S4506614-7200: LEAF,BUTT HINGE.

The LEAF,BUTT HINGE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, hinge_pin: NOT INCLUDED, knuckle_type: FRICTION, knuckle_length: 0.490 INCHES NOMINAL IN, overall_length: 72.000 INCHES NOMINAL IN, knuckle_quantity: 36. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-984-7332, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S4506614-7200
NSN: 5340-00-984-7332
FSC: 5340 — Hardware, Commercial
CAGE: 22176 — BANDY MANUFACTURING LLC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
hinge_pinNOT INCLUDED
knuckle_typeFRICTION
knuckle_length0.490 INCHES NOMINAL IN
overall_length72.000 INCHES NOMINAL IN
knuckle_quantity36
performance_typeNOT RATED
style_designatorBUTT BLANK
end_knuckle_length0.490 INCHES NOMINAL IN
material_thickness0.063 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
knuckle_inside_diameter0.133 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
NSN5340-00-984-7332
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S4506614-7200 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
REVERSIBLE FEATURE: NOT INCLUDED
•
KNUCKLE INSIDE DIAMETER: 0.133 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BUTT BLANK
•
PIN CENTER TO BODY EDGE DISTANCE: 2.359 INCHES NOMINAL IN
•
HINGE PIN: NOT INCLUDED
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
KNUCKLE QUANTITY: 36
TECHNICAL CHARACTERISTICS
REVERSIBLE FEATURENOT INCLUDED
KNUCKLE INSIDE DIAMETER0.133 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
STYLE DESIGNATORBUTT BLANK
OVERALL LENGTH72.000 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE2.359 INCHES NOMINAL IN
HINGE PINNOT INCLUDED
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
KNUCKLE QUANTITY36
END KNUCKLE LENGTH0.490 INCHES NOMINAL IN
KNUCKLE LENGTH0.490 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5821746-25Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S4506614-7200?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S4506614-7200?
S4506614-7200 is a LEAF,BUTT HINGE.
What parts can replace S4506614-7200?
There is 1 known substitute for S4506614-7200: 5821746-25. Substitute compatibility should be verified for your specific system.
What is the NSN for S4506614-7200?
S4506614-7200 is cataloged in the U.S. Government catalog under NSN 5340-00-984-7332. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S4506614-7200

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.