PartsTable
Technical Data Sheet
Download PDF

S4275 — RESISTOR,THERMAL

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

S4275: RESISTOR,THERMAL.

The RESISTOR,THERMAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, eye_diameter: 0.094 INCHES NOMINAL IN, inclosure_type: HERMETICALLY SEALED, stock_diameter: 0.062 INCHES NOMINAL IN, lockspring_style: LOCKSPRING, style_designator: PROBE. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-489-0868, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ S4275
NSN: 5325-00-489-0868
NIINs: 004890868, 010854963
FSC: 5325 — Fastening Devices
CAGE: 72794 — SOUTHCO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
eye_diameter0.094 INCHES NOMINAL IN
inclosure_typeHERMETICALLY SEALED
stock_diameter0.062 INCHES NOMINAL IN
lockspring_styleLOCKSPRING
style_designatorPROBE
heater_resistance100.000 OHMS
precious_materialGOLD AND PLATINUM AND SILVER
surface_treatmentCADMIUM OVERALL
reliability_indicatorESTABLISHED
maximum_current_rating6.00 MILLIAMPERES
maximum_operating_temp100.0 CELSIUS DEGC
NSN5325-00-489-0868
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: S4275 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN EYES: 0.750 INCHES NOMINAL IN
•
EYE DIAMETER: 0.094 INCHES NOMINAL IN
•
LOCKSPRING OVERALL HEIGHT: 0.275 INCHES NOMINAL IN
•
STOCK DIAMETER: 0.062 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
LOCKSPRING STYLE: LOCKSPRING
TECHNICAL CHARACTERISTICS
CENTER TO CENTER DISTANCE BETWEEN EYES0.750 INCHES NOMINAL IN
EYE DIAMETER0.094 INCHES NOMINAL IN
LOCKSPRING OVERALL HEIGHT0.275 INCHES NOMINAL IN
STOCK DIAMETER0.062 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
LOCKSPRING STYLELOCKSPRING
SUBSTITUTES & CROSS-REFERENCES 2
407935-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
1219-4275-Z3YReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S4275?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S4275?
S4275 is a RESISTOR,THERMAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace S4275?
There are 2 known substitutes for S4275: 407935-3, 1219-4275-Z3Y. Substitute compatibility should be verified for your specific system.
What is the NSN for S4275?
S4275 is cataloged in the U.S. Government catalog under NSN 5325-00-489-0868. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S4275

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.