PartsTable
Technical Data Sheet
Download PDF

S4235 — NOZZLE,FIRE EQUIPMENT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S4235: NOZZLE,FIRE EQUIPMENT.

The NOZZLE,FIRE EQUIPMENT is a the manufacturer industrial component. Key specifications include output_capacity: 60.0 GALLONS PER MINUTE NOMINAL, tip_adjustability: NONADJUSTABLE, media_for_which_designed: MECHANICAL FOAM, nondefinitive_spec/std_data: II TYPE, hose_connection_thread_diameter: 1.500 INCHES NOMINAL IN, minimum_water_pressure_required: 100.0 POUNDS LBS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-050-1594, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S4235
NSN: 5340-00-050-1594
NIINs: 000501594, 002871948
FSC: 5340 — Hardware, Commercial
CAGE: 62265 — VOLVO TRUCKS NORTH AMERICA, INC. DBA (FOREIGN PARENT IS VOLVO LASTVAGNAR AB, GOTEBORG, SWEDEN.) (USA)
SPECIFICATIONS
output_capacity60.0 GALLONS PER MINUTE NOMINAL
tip_adjustabilityNONADJUSTABLE
media_for_which_designedMECHANICAL FOAM
nondefinitive_spec/std_dataII TYPE
hose_connection_thread_diameter1.500 INCHES NOMINAL IN
minimum_water_pressure_required100.0 POUNDS LBS
hose_connection_thread_series_designatorNH
NSN5340-00-050-1594
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S4235 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIUS: 1.031 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.813 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL THICKNESS: 0.065 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010
TECHNICAL CHARACTERISTICS
RADIUS1.031 INCHES NOMINAL IN
OUTSIDE DIAMETER0.813 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL THICKNESS0.065 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010
SUBSTITUTES & CROSS-REFERENCES 4
501594Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
105602Reference document
Same NSN cross-reference
Reference document — Secondary reference
172532Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5340000501594Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S4235?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S4235?
S4235 is a NOZZLE,FIRE EQUIPMENT.
What parts can replace S4235?
There are 4 known substitutes for S4235: 501594, 105602, 172532 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S4235?
S4235 is cataloged in the U.S. Government catalog under NSN 5340-00-050-1594. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S4235