PartsTable
Technical Data Sheet
Download PDF

S3PPG — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

S3PPG: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 0.3747 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, overall_width: 0.2762 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM IN, alignment_type: RIGID, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-284-5279, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S3PPG
NSN: 3110-01-284-5279
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter0.3747 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
overall_width0.2762 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM IN
seal_quantity2
alignment_typeRIGID
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
features_providedSNAP RING-GROOVE MOUNTING
lubrication_materialGREASE
NSN3110-01-284-5279
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S3PPG · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
•
FEATURES PROVIDED: SNAP RING-GROOVE MOUNTING
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.2762 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
M-39796-CReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S3PPG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S3PPG?
S3PPG is a BEARING,BALL,ANNULAR.
What parts can replace S3PPG?
There is 1 known substitute for S3PPG: M-39796-C. Substitute compatibility should be verified for your specific system.
What is the NSN for S3PPG?
S3PPG is cataloged in the U.S. Government catalog under NSN 3110-01-284-5279. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S3PPG