PartsTable
Technical Data Sheet
Download PDF

S3PP FS104 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

S3PP FS104: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.3747 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, overall_width: 0.2800 INCHES MAXIMUM IN, alignment_type: RIGID, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-171-1862, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S3PP FS104
NSN: 3110-01-171-1862
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.3747 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
overall_width0.2800 INCHES MAXIMUM IN
seal_quantity2
alignment_typeRIGID
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
overall_outside_diameter0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
nondefinitive_spec/std_data115 TYPE
NSN3110-01-171-1862
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S3PP FS104 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
SURFACE FINISH: GROUND
•
REFERENCE DATA AND LITERATURE: MIL-STD-102
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
SURFACE FINISHGROUND
REFERENCE DATA AND LITERATUREMIL-STD-102
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.2800 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
SPECIFICATION/STANDARD DATA81348-FF-B-171 GOVERNMENT SPECIFICATION
NONDEFINITIVE SPEC/STD DATA115 TYPE
SUBSTITUTES & CROSS-REFERENCES 5
AA59644-111XMBSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A-A-59644Reference document
Same NSN cross-reference
Reference document — Identification reference
115X00619X4000Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-B-171Reference document
Same NSN cross-reference
Reference document — Secondary reference
S3PPFS381ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S3PP FS104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S3PP FS104?
S3PP FS104 is a BEARING,BALL,ANNULAR.
What parts can replace S3PP FS104?
There are 5 known substitutes for S3PP FS104: AA59644-111XMB, A-A-59644, 115X00619X4000 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S3PP FS104?
S3PP FS104 is cataloged in the U.S. Government catalog under NSN 3110-01-171-1862. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S3PP FS104