PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S390SSG3
S390SSG3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.009 INCHES MAXIMUM IN, material: STEEL COMP 302 OR STEEL COMP 321 BAND, loop_width: 0.180 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: MULTIPLE LOOP, tongue_hole_type: ROUND, THREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-496-2305, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S390SSG3
NSN: 5340-01-496-2305
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
diameter0.194 INCHES MINIMUM AND 0.009 INCHES MAXIMUM IN
materialSTEEL COMP 302 OR STEEL COMP 321 BAND
loop_width0.180 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
style_designatorMULTIPLE LOOP
tongue_hole_typeROUND, THREADED
material_thickness0.050 INCHES NOMINAL IN
NSN5340-01-496-2305
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S390SSG3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SILICONE CLASS Q CUSHION
•
STYLE DESIGNATOR: MULTIPLE LOOP
•
TONGUE HOLE TYPE: ROUND, THREADED
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
DIAMETER: 0.194 INCHES MINIMUM AND 0.009 INCHES MAXIMUM IN
•
LOOP WIDTH: 0.180 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SILICONE CLASS Q CUSHION
STYLE DESIGNATORMULTIPLE LOOP
MATERIALSTEEL COMP 302 OR STEEL COMP 321 BAND
TONGUE HOLE TYPEROUND, THREADED
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
DIAMETER0.194 INCHES MINIMUM AND 0.009 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
LOOP WIDTH0.180 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
G9623P56Interchangeable
interchangeable cross-reference
interchangeable
70343-3Interchangeable
interchangeable cross-reference
interchangeable
543405Interchangeable
interchangeable cross-reference
interchangeable
2530007349775Interchangeable
interchangeable cross-reference
interchangeable
EL-110Interchangeable
interchangeable cross-reference
interchangeable
S390Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S390SSG3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S390SSG3?
S390SSG3 is a CLAMP,LOOP.
What parts can replace S390SSG3?
There are 6 known substitutes for S390SSG3: G9623P56, 70343-3, 543405 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S390SSG3?
S390SSG3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-496-2305. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S390SSG3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026