PartsTable
Technical Data Sheet
Download PDF

S38411-011BAK1S — PACKING ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S38411-011BAK1S: PACKING ASSEMBLY.

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN, material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR INTERMEDIATE RING, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, inside_diameter: 0.287 INCHES NOMINAL IN, outside_diameter: 0.417 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR BOTTOM RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-133-1120, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S38411-011BAK1S
NSN: 5330-01-133-1120
FSC: 5330 — Packing and Gasket Materials
CAGE: 09257 — TRELLEBORG SEALING SOLUTIONS US, INC. (USA)
SPECIFICATIONS
height0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR INTERMEDIATE RING
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
inside_diameter0.287 INCHES NOMINAL IN
outside_diameter0.417 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
intermediate_ring_quantity1
cross-sectional_shape_styleSQUARE/RECTANGULAR BOTTOM RING
material_document_and_classification160AFSCM 72902 MFR REF SINGLE MATERIAL RESPONSE INTERMEDIATE RING
NSN5330-01-133-1120
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S38411-011BAK1S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
INTERMEDIATE RING QUANTITY: 1
•
OUTSIDE DIAMETER: 0.417 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 160AFSCM 72902 MFR REF SINGLE MATERIAL RESPONSE INTERMEDIATE RING
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR BOTTOM RING
•
INSIDE DIAMETER: 0.287 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
INTERMEDIATE RING QUANTITY1
OUTSIDE DIAMETER0.417 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION160AFSCM 72902 MFR REF SINGLE MATERIAL RESPONSE INTERMEDIATE RING
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR BOTTOM RING
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR TOP RING
CROSS-SECTIONAL SHAPE STYLESPECIAL INTERMEDIATE RING
INSIDE DIAMETER0.287 INCHES NOMINAL IN
HEIGHT0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR INTERMEDIATE RING
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 3
7011FS-160-5708Reference document
Same NSN cross-reference
Reference document — Secondary reference
ST7M288-011E2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AE14733-002Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S38411-011BAK1S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S38411-011BAK1S?
S38411-011BAK1S is a PACKING ASSEMBLY.
What parts can replace S38411-011BAK1S?
There are 3 known substitutes for S38411-011BAK1S: 7011FS-160-5708, ST7M288-011E2, AE14733-002. Substitute compatibility should be verified for your specific system.
What is the NSN for S38411-011BAK1S?
S38411-011BAK1S is cataloged in the U.S. Government catalog under NSN 5330-01-133-1120. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S38411-011BAK1S