PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S3746BISTE7P515LY167
S3746BISTE7P515LY167 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING INNER RING, bore_diameter: 2.3122 INCHES MINIMUM AND 2.3126 INCHES MAXIMUM IN, load_direction: RADIAL, inner_ring_width: 0.2800 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN, outer_ring_width: 0.2500 INCHES NOMINAL IN, special_features: FRACTURED OUTER RING W/2 RETAINING RINGS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-012-3897, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S3746BISTE7P515LY167
NSN: 3110-00-012-3897
FSC: 3110
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING INNER RING
bore_diameter2.3122 INCHES MINIMUM AND 2.3126 INCHES MAXIMUM IN
load_directionRADIAL
shield_quantity2
inner_ring_width0.2800 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
outer_ring_width0.2500 INCHES NOMINAL IN
special_featuresFRACTURED OUTER RING W/2 RETAINING RINGS
style_designatorSINGLE ROW INNER RING EXTENDED BOTH SIDES
overall_outside_diameter2.8746 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM IN
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-012-3897
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S3746BISTE7P515LY167 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
INNER RING WIDTH: 0.2800 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
•
SHIELD QUANTITY: 2
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
OUTER RING WIDTH: 0.2500 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING INNER RING
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
INNER RING WIDTH0.2800 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
SHIELD QUANTITY2
SPECIAL FEATURESFRACTURED OUTER RING W/2 RETAINING RINGS
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
OUTER RING WIDTH0.2500 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING INNER RING
MATERIALSTEEL CORROSION RESISTING SHIELD
OVERALL OUTSIDE DIAMETER2.8746 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM IN
BORE DIAMETER2.3122 INCHES MINIMUM AND 2.3126 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
G83Interchangeable
interchangeable cross-reference
interchangeable
6598Interchangeable
interchangeable cross-reference
interchangeable
WB50Interchangeable
interchangeable cross-reference
interchangeable
640002Interchangeable
interchangeable cross-reference
interchangeable
760032-115Interchangeable
interchangeable cross-reference
interchangeable
02-010117-000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S3746BISTE7P515LY167?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S3746BISTE7P515LY167?
S3746BISTE7P515LY167 is a BEARING,BALL,AIRFRAME.
What parts can replace S3746BISTE7P515LY167?
There are 8 known substitutes for S3746BISTE7P515LY167: G83, 6598, WB50 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S3746BISTE7P515LY167?
S3746BISTE7P515LY167 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-012-3897. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S3746BISTE7P515LY167

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026