PartsTable
Technical Data Sheet
Download PDF

S3712-0002 — ADAPTER,TIE DOWN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S3712-0002: ADAPTER,TIE DOWN.

The ADAPTER,TIE DOWN is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, ring_style: DEE, load_rating: 2000.0 POUNDS MAXIMUM LBS, inside_width: 1.480 INCHES NOMINAL IN, inside_height: 0.690 INCHES NOMINAL IN, overall_width: 2.280 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-727-7139, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S3712-0002
NSN: 5340-01-727-7139
FSC: 5340 — Hardware, Commercial
CAGE: 1CXX6 — SUNCOR STAINLESS, INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
ring_styleDEE
load_rating2000.0 POUNDS MAXIMUM LBS
inside_width1.480 INCHES NOMINAL IN
inside_height0.690 INCHES NOMINAL IN
overall_width2.280 INCHES NOMINAL IN
overall_height0.500 INCHES NOMINAL IN
overall_length2.280 INCHES NOMINAL IN
attachment_typeCARGO RING
mounting_hole_typeCOUNTERSUNK
mounting_hole_diameter0.320 INCHES NOMINAL IN
end_item_identification5410-017235171
NSN5340-01-727-7139
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S3712-0002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE WIDTH: 1.480 INCHES NOMINAL IN
•
ATTACHMENT TYPE: CARGO RING
•
LOAD RATING: 2000.0 POUNDS MAXIMUM LBS
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES: 1.250 INCHES NOMINAL IN
•
MOUNTING HOLE ARRANGEMENT STYLE: TWO HOLE
•
MOUNTING HOLE DIAMETER: 0.320 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.500 INCHES NOMINAL IN
INSIDE WIDTH1.480 INCHES NOMINAL IN
ATTACHMENT TYPECARGO RING
LOAD RATING2000.0 POUNDS MAXIMUM LBS
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES1.250 INCHES NOMINAL IN
MOUNTING HOLE ARRANGEMENT STYLETWO HOLE
MOUNTING HOLE DIAMETER0.320 INCHES NOMINAL IN
OVERALL LENGTH2.280 INCHES NOMINAL IN
OVERALL WIDTH2.280 INCHES NOMINAL IN
RING STYLEDEE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S3712-0002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S3712-0002?
S3712-0002 is a ADAPTER,TIE DOWN.
What is the NSN for S3712-0002?
S3712-0002 is cataloged in the U.S. Government catalog under NSN 5340-01-727-7139. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S3712-0002

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.