PartsTable
Technical Data Sheet
Download PDF

S369WH-34 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S369WH-34: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-129-2854, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S369WH-34
NSN: 5340-01-129-2854
FSC: 5340 — Hardware, Commercial
CAGE: 18076 — UMPCO, INC. DBA UMPCO INC (USA)
SPECIFICATIONS
diameter0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
overall_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
loop_inside_diameter2.110 INCHES MINIMUM AND 2.140 INCHES MAXIMUM IN
specification/standard_data81205-BACC10GE MANUFACTURERS SPECIFICATION
material_document_and_classificationD6-54312-1 FSCM 81205 MFR REF SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end1.693 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-416 TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BAND
NSN5340-01-129-2854
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S369WH-34 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: D6-54312-1 FSCM 81205 MFR REF SINGLE MATERIAL RESPONSE CUSHION
•
DIAMETER: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.693 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 81205-BACC10GE MANUFACTURERS SPECIFICATION
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BAND
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIOND6-54312-1 FSCM 81205 MFR REF SINGLE MATERIAL RESPONSE CUSHION
DIAMETER0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.693 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA81205-BACC10GE MANUFACTURERS SPECIFICATION
SURFACE TREATMENTCADMIUM BAND
TONGUE HOLE TYPEROUND, UNTHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
BACC10GE34Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S369WH-34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S369WH-34?
S369WH-34 is a CLAMP,LOOP.
What parts can replace S369WH-34?
There is 1 known substitute for S369WH-34: BACC10GE34. Substitute compatibility should be verified for your specific system.
What is the NSN for S369WH-34?
S369WH-34 is cataloged in the U.S. Government catalog under NSN 5340-01-129-2854. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S369WH-34

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.