PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S347-6
S347-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

HOLDER,ELECTRICAL CONTACT BRUSH. Key specifications include material: STEEL, inside_width: 0.234 INCHES NOMINAL IN, inside_length: 0.844 INCHES NOMINAL IN, overall_width: 0.562 INCHES NOMINAL IN, terminal_type: HOLE, overall_length: 0.844 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-605-5432, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S347-6
NSN: 5340-00-605-5432
FSC: 5340
CAGE: 076M6 — AMZ ALABAMA INC. (USA)
SPECIFICATIONS
materialSTEEL
inside_width0.234 INCHES NOMINAL IN
inside_length0.844 INCHES NOMINAL IN
overall_width0.562 INCHES NOMINAL IN
terminal_typeHOLE
overall_length0.844 INCHES NOMINAL IN
inside_thickness0.234 INCHES NOMINAL IN
special_featuresFITS VALVE UP TO 6.35 TO 25 MILLIMETER DIAMETER MM
overall_thickness0.875 INCHES NOMINAL IN
terminal_quantity1
brush_quantity_accommodated_per_holder1
part_name_assigned_by_controlling_agencyBALL VALVE LOCKOUT SMALL
NSN5340-00-605-5432
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S347-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
7412069Interchangeable
interchangeable cross-reference
interchangeable
1359Interchangeable
interchangeable cross-reference
interchangeable
2930002458164Interchangeable
interchangeable cross-reference
interchangeable
3438159Interchangeable
interchangeable cross-reference
interchangeable
S-3476Interchangeable
interchangeable cross-reference
interchangeable
35914Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S347-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S347-6?
S347-6 is a HOLDER,ELECTRICAL CONTACT BRUSH.
What parts can replace S347-6?
There are 11 known substitutes for S347-6: 7412069, 1359, 2930002458164 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S347-6?
S347-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-605-5432. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S347-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026