PartsTable
Technical Data Sheet
Download PDF

S339P1 — CLIP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S339P1: CLIP,RETAINING.

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.25625 INCHES NOMINAL IN, material: STEEL UNS K08500, overall_height: 0.53125 INCHES NOMINAL IN, stock_diameter: 0.05000 INCHES NOMINAL IN, style_designator: PIN, surface_treatment: ENAMEL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-664-5476, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S339P1
NSN: 5340-00-664-5476
FSC: 5340 — Hardware, Commercial
CAGE: 4J976 — REGAL AIR, INC. (USA)
SPECIFICATIONS
width0.25625 INCHES NOMINAL IN
materialSTEEL UNS K08500
overall_height0.53125 INCHES NOMINAL IN
stock_diameter0.05000 INCHES NOMINAL IN
style_designatorPIN
surface_treatmentENAMEL
casehardening_indicatorNOT CASEHARDENED
material_document_and_classificationQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-664-5476
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S339P1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: PIN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE
•
STOCK DIAMETER: 0.05000 INCHES NOMINAL IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
SURFACE TREATMENT: ENAMEL
•
WIDTH: 0.25625 INCHES NOMINAL IN
•
MATERIAL: STEEL UNS K08500
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.53125 INCHES NOMINAL IN
STYLE DESIGNATORPIN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE
STOCK DIAMETER0.05000 INCHES NOMINAL IN
CASEHARDENING INDICATORNOT CASEHARDENED
SURFACE TREATMENTENAMEL
WIDTH0.25625 INCHES NOMINAL IN
MATERIALSTEEL UNS K08500
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
0660080-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S339P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S339P1?
S339P1 is a CLIP,RETAINING.
What parts can replace S339P1?
There is 1 known substitute for S339P1: 0660080-1. Substitute compatibility should be verified for your specific system.
What is the NSN for S339P1?
S339P1 is cataloged in the U.S. Government catalog under NSN 5340-00-664-5476. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S339P1