PartsTable
Technical Data Sheet
Download PDF

S332G12 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S332G12: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.531 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR CUSHION, overall_width: 0.750 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ZINC AND CHROMATE OR CADMIUM AND CHROMATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-246-0666, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S332G12
NSN: 5340-01-246-0666
FSC: 5340 — Hardware, Commercial
CAGE: 18076 — UMPCO, INC. DBA UMPCO INC (USA)
SPECIFICATIONS
diameter0.531 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR CUSHION
overall_width0.750 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentZINC AND CHROMATE OR CADMIUM AND CHROMATE BAND
material_thickness0.030 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
cushioning_environmental_protectionOIL RESISTANT AND WEATHER RESISTANT AND OZONE RESISTANT AND HEAT
material_document_and_classificationAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end1.438 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-Z-325,TY2,CL2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416,TY2,CL2 FED SPEC 2ND TREATMENT RESPONSE BAND
NSN5340-01-246-0666
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S332G12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TY2,CL2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416,TY2,CL2 FED SPEC 2ND TREATMENT RESPONSE BAND
•
CUSHIONING ENVIRONMENTAL PROTECTION: OIL RESISTANT AND WEATHER RESISTANT AND OZONE RESISTANT AND HEAT
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
DIAMETER: 0.531 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325,TY2,CL2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416,TY2,CL2 FED SPEC 2ND TREATMENT RESPONSE BAND
CUSHIONING ENVIRONMENTAL PROTECTIONOIL RESISTANT AND WEATHER RESISTANT AND OZONE RESISTANT AND HEAT
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
DIAMETER0.531 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.030 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.438 INCHES NOMINAL IN
SURFACE TREATMENTZINC AND CHROMATE OR CADMIUM AND CHROMATE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5029209-072-103Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S332G12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S332G12?
S332G12 is a CLAMP,LOOP.
What parts can replace S332G12?
There is 1 known substitute for S332G12: 5029209-072-103. Substitute compatibility should be verified for your specific system.
What is the NSN for S332G12?
S332G12 is cataloged in the U.S. Government catalog under NSN 5340-01-246-0666. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S332G12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.