PartsTable
Technical Data Sheet
Download PDF

S325B14 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S325B14: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 0.500 INCHES NOMINAL IN, special_features: CUSHION GENERAL PURPOSE NEOPRENE PER UMP-CM-NEO-003 PLUS BIOCIDE COLOR BLACK, style_designator: SINGLE LOOP, material_diameter: 0.875 INCHES NOMINAL IN, surface_treatment: ZINC OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-614-5970, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S325B14
NSN: 5340-01-614-5970
FSC: 5340 — Hardware, Commercial
CAGE: 18076 — UMPCO, INC. DBA UMPCO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.500 INCHES NOMINAL IN
special_featuresCUSHION GENERAL PURPOSE NEOPRENE PER UMP-CM-NEO-003 PLUS BIOCIDE COLOR BLACK
style_designatorSINGLE LOOP
material_diameter0.875 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.875 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.655 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.889 INCHES NOMINAL IN
NSN5340-01-614-5970
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S325B14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.655 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.889 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DIAMETER0.875 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.655 INCHES NOMINAL IN
SPECIAL FEATURESCUSHION GENERAL PURPOSE NEOPRENE PER UMP-CM-NEO-003 PLUS BIOCIDE COLOR BLACK
SURFACE TREATMENTZINC OVERALL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.889 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
LOOP INSIDE DIAMETER0.875 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
10003568-22Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S325B14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S325B14?
S325B14 is a CLAMP,LOOP.
What parts can replace S325B14?
There is 1 known substitute for S325B14: 10003568-22. Substitute compatibility should be verified for your specific system.
What is the NSN for S325B14?
S325B14 is cataloged in the U.S. Government catalog under NSN 5340-01-614-5970. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S325B14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.