S318 — CONNECTOR,RECEPTACLE,ELECTRICAL

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

S318: CONNECTOR,RECEPTACLE,ELECTRICAL.

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL CORROSION RESISTING, end_similarity: IDENTICAL, overall_length: 1.875 INCHES NOMINAL IN, surface_finish: 10.0 MICROINCHES, first_end_style: PLAIN, special_features: 45.0 DEG CHAMFER BOTH ENDS. This part is cataloged in the U.S.

Government catalog under NSN 9540-00-119-2133, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ S318

NSN: 9540-00-119-2133
NIINs: 001192133, 001625006, 002513199, 003685839, 005814047, 010211250, 011994630
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 71379 — CESSNA AIRCRAFT COMPANY DBA TEXTRON AVIATION (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING
end_similarity	IDENTICAL
overall_length	1.875 INCHES NOMINAL IN
surface_finish	10.0 MICROINCHES
first_end_style	PLAIN
special_features	45.0 DEG CHAMFER BOTH ENDS
first_end_diameter	0.1872 INCHES NOMINAL IN
fsc_application_data	GROUND SUPPORT EQUIPMENT,F-18 ACFT
material_document_and_classification	QQ-S-764,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE
NSN	9540-00-119-2133

COMPONENT DIAGRAM

KEY FEATURES

•

THIRD TIP RADIUS: 0.094 INCHES NOMINAL IN

•

RIGHT SIDE TOP FLANGE THICKNESS: 0.094 INCHES NOMINAL IN

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES: 0.938 INCHES NOMINAL IN

•

RIGHT TOP INSIDE ANGLE: 90.0 DEGREES NOMINAL

•

THIRD TIP STYLE: FULL RADIUS

•

LEFT TOP INSIDE ANGLE: 90.0 DEGREES NOMINAL

TECHNICAL CHARACTERISTICS

THIRD TIP RADIUS	0.094 INCHES NOMINAL IN
OVERALL HEIGHT	1.000 INCHES NOMINAL IN
RIGHT SIDE TOP FLANGE THICKNESS	0.094 INCHES NOMINAL IN
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	0.938 INCHES NOMINAL IN
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
THIRD TIP STYLE	FULL RADIUS
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
HEAT TREATMENT	T-3511 SOLUTION HEAT TREATED
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 4

AMS-QQ-A-200/3Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

QQA200-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

ASTM B221Reference document

Same NSN cross-reference

Reference document — Secondary reference

AND10136-1702Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy S318?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is S318?

S318 is a CONNECTOR,RECEPTACLE,ELECTRICAL. It is classified as a MRO (MRO_GENERAL).

What parts can replace S318?

There are 4 known substitutes for S318: AMS-QQ-A-200/3, QQA200-3, ASTM B221 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for S318?

S318 is cataloged in the U.S. Government catalog under NSN 9540-00-119-2133. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

S318 — CONNECTOR,RECEPTACLE,ELECTRICAL

Request a Quote — S318