PartsTable
Technical Data Sheet
PartsTable / O-RING / S310-1
S310-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The VALVE,SOLENOID is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY SEAT, connection_type: UNTHREADED INTERNAL TUBE FIRST END, connection_style: PLAIN (TUBE) SECOND END, style_designator: STRAIGHT THRU, aperture_diameter: 0.562 INCHES NOMINAL IN, mounting_position: HORIZONTAL OR VERTICAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-417-3528, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S310-1
NSN: 5331-00-417-3528
FSC: 5331 — O-RING
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
materialCOPPER ALLOY SEAT
connection_typeUNTHREADED INTERNAL TUBE FIRST END
connection_stylePLAIN (TUBE) SECOND END
style_designatorSTRAIGHT THRU
aperture_diameter0.562 INCHES NOMINAL IN
mounting_positionHORIZONTAL OR VERTICAL
operating_pressure450.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
flow_control_deviceNEEDLE OR STEM
maximum_operating_temp225.0 FAHRENHEIT SINGLE RESPONSE DEGF
valve_operation_methodSOLENOID
voltage_in_volts_and_current_type24.0 AC
nominal_outside_diameter_tube_accommodated1.250 INCHES SECOND END IN
NSN5331-00-417-3528
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S310-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 0.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT0.156 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
240RA9T7-M,24VInterchangeable
interchangeable cross-reference
interchangeable
801169Interchangeable
interchangeable cross-reference
interchangeable
S310-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S310-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S310-1?
S310-1 is a VALVE,SOLENOID.
What parts can replace S310-1?
There are 3 known substitutes for S310-1: 240RA9T7-M,24V, 801169, S310-1. Substitute compatibility should be verified for your specific system.
What is the NSN for S310-1?
S310-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-417-3528. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S310-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026