PartsTable
Technical Data Sheet
Download PDF

S300-22 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S300-22: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.064 INCHES NOMINAL IN, loop_inside_diameter: 1.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-408-5992, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S300-22
NSN: 5340-00-408-5992
FSC: 5340 — Hardware, Commercial
CAGE: 18076 — UMPCO, INC. DBA UMPCO INC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.064 INCHES NOMINAL IN
loop_inside_diameter1.375 INCHES NOMINAL IN
specification/standard_data81205-BACC10HS MANUFACTURERS SPECIFICATION
cushioning_environmental_protectionFUEL, AROMATIC AND HEAT AND HYDRAULIC FLUID AND OIL RESISTANT
distance_from_loop_center_to_tongue_end1.406 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.188 INCHES NOMINAL IN
NSN5340-00-408-5992
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S300-22 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: FUEL, AROMATIC AND HEAT AND HYDRAULIC FLUID AND OIL RESISTANT
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.064 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.406 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 81205-BACC10HS MANUFACTURERS SPECIFICATION
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
CUSHIONING ENVIRONMENTAL PROTECTIONFUEL, AROMATIC AND HEAT AND HYDRAULIC FLUID AND OIL RESISTANT
STYLE DESIGNATOROFFSET MOUNT
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.064 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.406 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA81205-BACC10HS MANUFACTURERS SPECIFICATION
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.188 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.375 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 6
490-22RReference document
Same NSN cross-reference
Reference document — Secondary reference
TA025029-22Reference document
Same NSN cross-reference
Reference document — Secondary reference
TA9C18H22ACReference document
Same NSN cross-reference
Reference document — Secondary reference
BACC10EP22Reference document
Same NSN cross-reference
Reference document — Secondary reference
JP0030-22Reference document
Same NSN cross-reference
Reference document — Secondary reference
490-22RPBReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy S300-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S300-22?
S300-22 is a CLAMP,LOOP.
What parts can replace S300-22?
There are 6 known substitutes for S300-22: 490-22R, TA025029-22, TA9C18H22AC and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S300-22?
S300-22 is cataloged in the U.S. Government catalog under NSN 5340-00-408-5992. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S300-22

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.