PartsTable
Technical Data Sheet
Download PDF

S3-10205-1 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

S3-10205-1: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.938 INCHES MAXIMUM IN, shaft_style: ROUND, bearing_type: BALL SHAFT, pilot_length: 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN, shaft_length: 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-676-5035, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ S3-10205-1
NSN: 5905-00-676-5035
FSC: 5905 — Resistor
CAGE: 10112 — GENERAL DYNAMICS MOTION CONTROL LLC (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.938 INCHES MAXIMUM IN
shaft_styleROUND
bearing_typeBALL SHAFT
pilot_length0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
shaft_length0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
shaft_runout0.001 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter2.000 INCHES NOMINAL IN
lateral_runout0.002 INCHES IN
overall_length2.500 INCHES NOMINAL IN
pilot_diameter1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
NSN5905-00-676-5035
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN S3-10205-1 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 0.75 INCH-OUNCES IN
•
BODY DIAMETER: 2.000 INCHES NOMINAL IN
•
LATERAL RUNOUT: 0.002 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 10.000 KILOHMS SINGLE SECTION
•
MOUNTING LIP DEPTH: 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM IN
•
UNDERCUT WIDTH: 0.0730 INCHES MINIMUM IN
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE0.75 INCH-OUNCES IN
BODY DIAMETER2.000 INCHES NOMINAL IN
LATERAL RUNOUT0.002 INCHES IN
ELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS SINGLE SECTION
MOUNTING LIP DEPTH0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM IN
UNDERCUT WIDTH0.0730 INCHES MINIMUM IN
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES NOMINAL IN
UNDERCUT DIAMETER1.875 INCHES MAXIMUM IN
BODY STYLECYLINDRICAL SERVO MOUNTED
SUBSTITUTES & CROSS-REFERENCES 2
772152Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3885Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S3-10205-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S3-10205-1?
S3-10205-1 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace S3-10205-1?
There are 2 known substitutes for S3-10205-1: 772152, 3885. Substitute compatibility should be verified for your specific system.
What is the NSN for S3-10205-1?
S3-10205-1 is cataloged in the U.S. Government catalog under NSN 5905-00-676-5035. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S3-10205-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.