PartsTable / O-RING / S2L-230
S2L-230
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.734 INCHES MINIMUM AND 2.790 INCHES MAXIMUM IN, center_hole_diameter: 2.464 INCHES MINIMUM AND 2.504 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1948, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
S2L-230
NSN: 5331-00-165-1948 FSC: 5331 — O-RINGCAGE: 08118 — EATON AVIATION CORPORATION (USA)
SPECIFICATIONS
material RUBBER FLUOROCARBON CLASS FPM temp_rating -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF hardness_rating 75.0 SHORE DUROMETER A NOMINAL outside_diameter 2.734 INCHES MINIMUM AND 2.790 INCHES MAXIMUM IN center_hole_diameter 2.464 INCHES MINIMUM AND 2.504 INCHES MAXIMUM IN elongation_percentage 125 MAXIMUM cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-00-165-1948
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: S2L-230
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
• OUTSIDE DIAMETER: 2.734 INCHES MINIMUM AND 2.790 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 2.464 INCHES MINIMUM AND 2.504 INCHES MAXIMUM IN
• ELONGATION PERCENTAGE: 125 MAXIMUM
• MATERIAL: RUBBER FLUOROCARBON CLASS FPM
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING 75.0 SHORE DUROMETER A NOMINAL OUTSIDE DIAMETER 2.734 INCHES MINIMUM AND 2.790 INCHES MAXIMUM IN CENTER HOLE DIAMETER 2.464 INCHES MINIMUM AND 2.504 INCHES MAXIMUM IN ELONGATION PERCENTAGE 125 MAXIMUM MATERIAL RUBBER FLUOROCARBON CLASS FPM CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN TEMP RATING -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
18197 Interchangeable interchangeable cross-reference
interchangeable
WF-18 Interchangeable interchangeable cross-reference
interchangeable
NAS816-75 Interchangeable interchangeable cross-reference
interchangeable
C-845 Interchangeable interchangeable cross-reference
interchangeable
40338 Interchangeable interchangeable cross-reference
interchangeable
657-1004-000 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy S2L-230?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S2L-230?
S2L-230 is a O-RING.
What parts can replace S2L-230?
There are 31 known substitutes for S2L-230: 18197, WF-18, NAS816-75 and 28 more. Substitute compatibility should be verified for your specific system.
Is S2L-230 still available?
S2L-230 is currently cancelled.
Request a Quote — S2L-230