PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S29414
S29414 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: WOOL OVERALL, thickness: 0.188 INCHES NOMINAL IN, hole_diameter: 0.620 INCHES NOMINAL IN, overall_diameter: 0.875 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-559-2375, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S29414
NSN: 5310-00-559-2375
FSC: 5310
CAGE: 80212 — BAE SYSTEMS LAND & ARMAMENTS L.P. (USA)
SPECIFICATIONS
materialWOOL OVERALL
thickness0.188 INCHES NOMINAL IN
hole_diameter0.620 INCHES NOMINAL IN
overall_diameter0.875 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-559-2375
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S29414 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.620 INCHES NOMINAL IN
•
THICKNESS: 0.188 INCHES NOMINAL IN
•
MATERIAL: WOOL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.875 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.620 INCHES NOMINAL IN
THICKNESS0.188 INCHES NOMINAL IN
MATERIALWOOL OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER0.875 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
5543BInterchangeable
interchangeable cross-reference
interchangeable
5543AInterchangeable
interchangeable cross-reference
interchangeable
5945PL1211107Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S29414?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S29414?
S29414 is a WASHER,FLAT.
What parts can replace S29414?
There are 3 known substitutes for S29414: 5543B, 5543A, 5945PL1211107. Substitute compatibility should be verified for your specific system.
What is the NSN for S29414?
S29414 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-559-2375. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S29414

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026