PartsTable
Technical Data Sheet
Download PDF

S285 — RESISTOR SET,MATCHED

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

S285: RESISTOR SET,MATCHED.

The RESISTOR SET,MATCHED is a the manufacturer industrial component. Key specifications include length: 3.620 INCHES NOMINAL IN, starter: REQUIRED, material: STEEL OVERALL, nut_style: HEXAGON, thickness: 0.125 INCHES NOMINAL IN, nut_height: 0.277 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-212-0091, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ S285
NSN: 5310-00-212-0091
NIINs: 002120091, 004706154, 005354471, 010141594, 011227939, 013538110
FSC: 5310 — Nuts and Washers
CAGE: 82484 — CVG SPRAGUE DEVICES, LLC DBA CVG SPRAGUE DEVICES, LLC (USA)
SPECIFICATIONS
length3.620 INCHES NOMINAL IN
starterREQUIRED
materialSTEEL OVERALL
nut_styleHEXAGON
thickness0.125 INCHES NOMINAL IN
nut_height0.277 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
current_typeAC
thread_class2B
hole_diameter0.656 INCHES NOMINAL IN
overall_width3.188 INCHES NOMINAL IN
terminal_typeWIRE LEAD
thread_seriesUNIFIED NATIONAL COARSE (UNC)
NSN5310-00-212-0091
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S285 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: LEATHER OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.656 INCHES NOMINAL IN
•
THICKNESS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER1.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALLEATHER OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.656 INCHES NOMINAL IN
THICKNESS0.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S285?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S285?
S285 is a RESISTOR SET,MATCHED. It is classified as a MRO (MRO_GENERAL).
What is the NSN for S285?
S285 is cataloged in the U.S. Government catalog under NSN 5310-00-212-0091. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S285

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.