PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S2710-1
S2710-1 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.125 INCHES MINIMUM IN, fastener_length: 1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-293-1766, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S2710-1
NSN: 5305-01-293-1766
FSC: 5305
CAGE: 3D6E9 — MERITOR INDUSTRIAL PRODUCTS, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
thread_class2A A
thread_length1.125 INCHES MINIMUM IN
fastener_length1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
width_between_flats0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
nominal_thread_diameter0.437 INCHES IN
thread_quantity_per_inch14
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-293-1766
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: S2710-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: HEXAGON
•
FEATURES PROVIDED: FINISHED HEAD
•
WIDTH BETWEEN FLATS: 0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
FASTENER LENGTH: 1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.437 INCHES IN
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEHEXAGON
FEATURES PROVIDEDFINISHED HEAD
WIDTH BETWEEN FLATS0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.437 INCHES IN
THREAD CLASS2A A
THREAD LENGTH1.125 INCHES MINIMUM IN
HEAD HEIGHT0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
6356Interchangeable
interchangeable cross-reference
interchangeable
74100-15Interchangeable
interchangeable cross-reference
interchangeable
43-423Interchangeable
interchangeable cross-reference
interchangeable
13720Interchangeable
interchangeable cross-reference
interchangeable
14095676Interchangeable
interchangeable cross-reference
interchangeable
13716Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S2710-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S2710-1?
S2710-1 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace S2710-1?
There are 8 known substitutes for S2710-1: 6356, 74100-15, 43-423 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S2710-1?
S2710-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-293-1766. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S2710-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026