PartsTable
Technical Data Sheet
Download PDF

S2603-860062PC4NO174620 — PIN,TAPERED,PLAIN

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S2603-860062PC4NO174620: PIN,TAPERED,PLAIN.

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL COMP 416 OVERALL, pin_taper: 0.250 PER FOOT IN INCHES, first_end_style: SQUARE, hardness_rating: 38.0 ROCKWELL C NOMINAL OVERALL, surface_treatment: PASSIVATE OVERALL, first_end_location: BOTH ENDS. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-880-1289, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S2603-860062PC4NO174620
NSN: 5315-00-880-1289
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OVERALL
pin_taper0.250 PER FOOT IN INCHES
first_end_styleSQUARE
hardness_rating38.0 ROCKWELL C NOMINAL OVERALL
surface_treatmentPASSIVATE OVERALL
first_end_locationBOTH ENDS
pin_overall_length3.406 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-880-1289
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S2603-860062PC4NO174620 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: SQUARE
•
PIN TAPER: 0.250 PER FOOT IN INCHES
•
HARDNESS RATING: 38.0 ROCKWELL C NOMINAL OVERALL
•
PIN OVERALL LENGTH: 3.406 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 416 OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
FIRST END LOCATIONBOTH ENDS
FIRST END STYLESQUARE
PIN TAPER0.250 PER FOOT IN INCHES
HARDNESS RATING38.0 ROCKWELL C NOMINAL OVERALL
PIN OVERALL LENGTH3.406 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 416 OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
174620Reference document
Same NSN cross-reference
Reference document — Secondary reference
803-921790Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy S2603-860062PC4NO174620?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S2603-860062PC4NO174620?
S2603-860062PC4NO174620 is a PIN,TAPERED,PLAIN.
What parts can replace S2603-860062PC4NO174620?
There are 2 known substitutes for S2603-860062PC4NO174620: 174620, 803-921790. Substitute compatibility should be verified for your specific system.
What is the NSN for S2603-860062PC4NO174620?
S2603-860062PC4NO174620 is cataloged in the U.S. Government catalog under NSN 5315-00-880-1289. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S2603-860062PC4NO174620