PartsTable
Technical Data Sheet
Download PDF

S236MR034P001 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S236MR034P001: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.062 INCHES MINIMUM AND 0.062 INCHES MINIMUM AND 0.070 INCHES MAXIMUM0.070 INCHES MAXIMUM IN, hardness_rating: 35.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM43.0 ROCKWELL C MAXIMUM, outside_diameter: 0.104 INCHES MINIMUM AND 0.104 INCHES MINIMUM AND 0.112 INCHES MAXIMUM0.112 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: PASSIVATE OVERALL, material_thickness: 0.017 INCHES MINIMUM AND 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM0.023 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-040-4762, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S236MR034P001
NSN: 5310-01-040-4762
FSC: 5310 — Nuts and Washers
CAGE: 3B150 — RAYTHEON COMPANY DBA RAYTHEON CO (USA)
SPECIFICATIONS
hole_diameter0.062 INCHES MINIMUM AND 0.062 INCHES MINIMUM AND 0.070 INCHES MAXIMUM0.070 INCHES MAXIMUM IN
hardness_rating35.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM43.0 ROCKWELL C MAXIMUM
outside_diameter0.104 INCHES MINIMUM AND 0.104 INCHES MINIMUM AND 0.112 INCHES MAXIMUM0.112 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentPASSIVATE OVERALL
material_thickness0.017 INCHES MINIMUM AND 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM0.023 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-763,COND A FED SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-040-4762
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S236MR034P001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM43.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A FED SPEC ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 0.104 INCHES MINIMUM AND 0.104 INCHES MINIMUM AND 0.112 INCHES MAXIMUM0.112 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.017 INCHES MINIMUM AND 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM0.023 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM43.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER0.104 INCHES MINIMUM AND 0.104 INCHES MINIMUM AND 0.112 INCHES MAXIMUM0.112 INCHES MAXIMUM IN
MATERIAL THICKNESS0.017 INCHES MINIMUM AND 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM0.023 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OVERALL
HOLE DIAMETER0.062 INCHES MINIMUM AND 0.062 INCHES MINIMUM AND 0.070 INCHES MAXIMUM0.070 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy S236MR034P001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S236MR034P001?
S236MR034P001 is a WASHER,LOCK.
What is the NSN for S236MR034P001?
S236MR034P001 is cataloged in the U.S. Government catalog under NSN 5310-01-040-4762. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S236MR034P001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.