PartsTable
Technical Data Sheet
Download PDF

S235AS301-10 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S235AS301-10: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN, diameter: 0.2760 INCHES MINIMUM AND 0.2860 INCHES MAXIMUM IN, material: STEEL COMP 303 OVERALL, thread_class: 2B LEFT INTERNAL (INCLUDES THRU THREAD), hole_diameter: 0.2120 INCHES MINIMUM AND 0.2180 INCHES MAXIMUM IN, thread_length: 0.4350 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-332-7582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S235AS301-10
NSN: 5340-01-332-7582
FSC: 5340 — Hardware, Commercial
CAGE: 78711 — TELEPHONICS CORP (USA)
SPECIFICATIONS
length0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
diameter0.2760 INCHES MINIMUM AND 0.2860 INCHES MAXIMUM IN
materialSTEEL COMP 303 OVERALL
thread_class2B LEFT INTERNAL (INCLUDES THRU THREAD)
hole_diameter0.2120 INCHES MINIMUM AND 0.2180 INCHES MAXIMUM IN
thread_length0.4350 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN
style_designatorPROJECTION ONE END LEFT INTERNAL THREAD
thread_directionRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.1380 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
cross-sectional_shapeROUND
right_projection_length0.0600 INCHES NOMINAL IN
NSN5340-01-332-7582
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S235AS301-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.4350 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN
•
STYLE DESIGNATOR: PROJECTION ONE END LEFT INTERNAL THREAD
•
MATERIAL DOCUMENT AND CLASSIFICATION: AASTM-582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.2760 INCHES MINIMUM AND 0.2860 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
•
NOMINAL THREAD SIZE: 0.1380 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
TECHNICAL CHARACTERISTICS
LENGTH0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.4350 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN
STYLE DESIGNATORPROJECTION ONE END LEFT INTERNAL THREAD
MATERIAL DOCUMENT AND CLASSIFICATIONAASTM-582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.2760 INCHES MINIMUM AND 0.2860 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
NOMINAL THREAD SIZE0.1380 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
CROSS-SECTIONAL SHAPEROUND
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
5267789-003Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
936A071-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S235AS301-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S235AS301-10?
S235AS301-10 is a STANDOFF,THREADED,SPACING.
What parts can replace S235AS301-10?
There are 2 known substitutes for S235AS301-10: 5267789-003, 936A071-1. Substitute compatibility should be verified for your specific system.
What is the NSN for S235AS301-10?
S235AS301-10 is cataloged in the U.S. Government catalog under NSN 5340-01-332-7582. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S235AS301-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.