PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S2303
S2303 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

NUT RUNNER AND SCREWDRIVER,PNEUM. Key specifications include phase: SINGLE INPUT, material: STEEL COMP 1035 OVERALL, thickness: 0.1250 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM IN, drive_type: CLUTCH, duty_cycle: CONTINUOUS, flat_depth: 0.0270 INCHES NOMINAL IDENTICAL ENDS IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-6749, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S2303
NSN: 5315-00-010-6749
FSC: 5315
CAGE: 62265 — VOLVO TRUCKS NORTH AMERICA, INC. DBA (FOREIGN PARENT IS VOLVO LASTVAGNAR AB, GOTEBORG, SWEDEN.) (USA)
SPECIFICATIONS
phaseSINGLE INPUT
materialSTEEL COMP 1035 OVERALL
thickness0.1250 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM IN
drive_typeCLUTCH
duty_cycleCONTINUOUS
flat_depth0.0270 INCHES NOMINAL IDENTICAL ENDS IN
key_height0.198 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
handle_typePISTOL GRIP
switch_typePUSH
winding_typeINDUCTION-PERMANENT SPLIT CAPACITOR SPLIT PHASE
overall_width3.375 INCHES IN
cooling_methodNATURAL CONVECTION VENTILATED
NSN5315-00-010-6749
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S2303 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KEY HEIGHT: 0.198 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
•
THICKNESS: 0.1250 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM IN
•
KEY SIZE DESIGNATION: WOODRUFF 3
•
STARTING EDGE RADIUS: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
HARDNESS RATING: 10.0 ROCKWELL C NOMINAL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
STARTING EDGE SHAPE: ROUND
•
MATERIAL: STEEL COMP 1035 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
KEY HEIGHT0.198 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
THICKNESS0.1250 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM IN
KEY SIZE DESIGNATIONWOODRUFF 3
STARTING EDGE RADIUS0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
HARDNESS RATING10.0 ROCKWELL C NOMINAL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STARTING EDGE SHAPEROUND
MATERIALSTEEL COMP 1035 OVERALL
STYLE DESIGNATORROUND BOTTOM
CIRCLE DIAMETER0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
106749Interchangeable
interchangeable cross-reference
interchangeable
X158Interchangeable
interchangeable cross-reference
interchangeable
7541002Interchangeable
interchangeable cross-reference
interchangeable
13516Interchangeable
interchangeable cross-reference
interchangeable
B5-59-402Interchangeable
interchangeable cross-reference
interchangeable
401069-002Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S2303?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S2303?
S2303 is a NUT RUNNER AND SCREWDRIVER,PNEUM.
What parts can replace S2303?
There are 33 known substitutes for S2303: 106749, X158, 7541002 and 30 more. Substitute compatibility should be verified for your specific system.
Is S2303 still available?
S2303 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S2303

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026