PartsTable
Technical Data Sheet
Download PDF

S2210378-7 — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S2210378-7: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, recess_angle: 90.0 DEGREES NOMINAL, hole_diameter: 0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN, recess_diameter: 0.386 INCHES MINIMUM AND 0.396 INCHES MAXIMUM IN, outside_diameter: 0.750 INCHES NOMINAL IN, style_designator: RECESSED. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-418-7927, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S2210378-7
NSN: 5310-01-418-7927
FSC: 5310 — Nuts and Washers
CAGE: 58009 — MOELLER MANUFACTURING & SUPPLY, LLC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
recess_angle90.0 DEGREES NOMINAL
hole_diameter0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
recess_diameter0.386 INCHES MINIMUM AND 0.396 INCHES MAXIMUM IN
outside_diameter0.750 INCHES NOMINAL IN
style_designatorRECESSED
material_thickness0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
NSN5310-01-418-7927
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S2210378-7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RECESSED
•
OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
RECESS DIAMETER: 0.386 INCHES MINIMUM AND 0.396 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
HOLE DIAMETER: 0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
•
RECESS ANGLE: 90.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORRECESSED
OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
RECESS DIAMETER0.386 INCHES MINIMUM AND 0.396 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY OVERALL
HOLE DIAMETER0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
RECESS ANGLE90.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S2210378-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S2210378-7?
S2210378-7 is a WASHER,RECESSED.
What is the NSN for S2210378-7?
S2210378-7 is cataloged in the U.S. Government catalog under NSN 5310-01-418-7927. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S2210378-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.