S215-20 — BEARING,SLEEVE

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

S215-20: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: OIL LUBRICATING LUBRICATION, corner_shape: SQUARE OUTSIDE RIGHT CORNER, flange_width: 0.1235 INCHES MINIMUM AND 0.1275 INCHES MAXIMUM IN, overall_length: 0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN, hardness_rating: 50.0 ROCKWELL H NOMINAL OVERALL, style_designator: SOLID, EXTERNAL FLANGE ONE END. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-058-1740, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

S215-20

NSN: 3120-00-058-1740
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 54418 — MILTOPE CORPORATION (USA)

SPECIFICATIONS

material	OIL LUBRICATING LUBRICATION
corner_shape	SQUARE OUTSIDE RIGHT CORNER
flange_width	0.1235 INCHES MINIMUM AND 0.1275 INCHES MAXIMUM IN
overall_length	0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN
hardness_rating	50.0 ROCKWELL H NOMINAL OVERALL
style_designator	SOLID, EXTERNAL FLANGE ONE END
body_inside_diameter	0.3760 INCHES MINIMUM AND 0.3770 INCHES MAXIMUM IN
body_outside_diameter	0.5635 INCHES MINIMUM AND 0.5645 INCHES MAXIMUM IN
flange_outside_diameter	0.7475 INCHES MINIMUM AND 0.7525 INCHES MAXIMUM IN
nondefinitive_spec/std_data	1 TYPE OR A COMPOSITION
material_document_and_classification	MIL-B-5687,TYPE 1,GRADE 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	3120-00-058-1740

COMPONENT DIAGRAM

KEY FEATURES

•

CORNER SHAPE: SQUARE INSIDE RIGHT CORNER

•

FLANGE OUTSIDE DIAMETER: 0.7475 INCHES MINIMUM AND 0.7525 INCHES MAXIMUM IN

•

BODY OUTSIDE DIAMETER: 0.5635 INCHES MINIMUM AND 0.5645 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE BODY CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
FLANGE OUTSIDE DIAMETER	0.7475 INCHES MINIMUM AND 0.7525 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER	0.5635 INCHES MINIMUM AND 0.5645 INCHES MAXIMUM IN
HARDNESS RATING	50.0 ROCKWELL H NOMINAL OVERALL
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END

SUBSTITUTES & CROSS-REFERENCES 3

3021736-7Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

35562Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MILB5687Reference document

Same NSN cross-reference

Reference document — Identification reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy S215-20?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is S215-20?

S215-20 is a BEARING,SLEEVE.

What parts can replace S215-20?

There are 3 known substitutes for S215-20: 3021736-7, 35562, MILB5687. Substitute compatibility should be verified for your specific system.

What is the NSN for S215-20?

S215-20 is cataloged in the U.S. Government catalog under NSN 3120-00-058-1740. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

S215-20 — BEARING,SLEEVE

Request a Quote — S215-20