PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S200HJH6C40
S200HJH6C40 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C RETAINER, bore_shape: STRAIGHT, bore_diameter: 0.3935 INCHES MINIMUM AND 0.3937 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 0.3533 INCHES MINIMUM AND 0.3543 INCHES MAXIMUM IN, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-404-0871, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S200HJH6C40
NSN: 3110-00-404-0871
FSC: 3110
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 440C RETAINER
bore_shapeSTRAIGHT
bore_diameter0.3935 INCHES MINIMUM AND 0.3937 INCHES MAXIMUM IN
contact_angle25.0 DEGREES MAXIMUM
overall_width0.3533 INCHES MINIMUM AND 0.3543 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
precious_materialSILVER
internal_clearance0.0009 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL IN
lubrication_materialOIL
calibration_designatorC40
NSN3110-00-404-0871
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S200HJH6C40 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED-STD-66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
•
MATERIAL: STEEL COMP 440C OUTER RING
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
LUBRICATION MATERIAL: OIL
•
LOAD DIRECTION: ANGULAR
•
INTERNAL CLEARANCE: 0.0009 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD-66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
MATERIALSTEEL COMP 440C OUTER RING
MATERIALSTEEL COMP 440C BALL
CONTACT ANGLE25.0 DEGREES MAXIMUM
LUBRICATION MATERIALOIL
LOAD DIRECTIONANGULAR
INTERNAL CLEARANCE0.0009 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL IN
BORE SHAPESTRAIGHT
CALIBRATION DESIGNATORC40
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
120 57/64Interchangeable
interchangeable cross-reference
interchangeable
49757Interchangeable
interchangeable cross-reference
interchangeable
08892Interchangeable
interchangeable cross-reference
interchangeable
7006805Interchangeable
interchangeable cross-reference
interchangeable
201576Interchangeable
interchangeable cross-reference
interchangeable
6105PL2119614Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S200HJH6C40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S200HJH6C40?
S200HJH6C40 is a BEARING,BALL,ANNULAR.
What parts can replace S200HJH6C40?
There are 9 known substitutes for S200HJH6C40: 120 57/64, 49757, 08892 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S200HJH6C40?
S200HJH6C40 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-404-0871. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S200HJH6C40

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026