PartsTable
Technical Data Sheet
Download PDF

S2000 — SWITCH,PUSH

✓ Government record, cited
EIZO · ORING SEAL
PRODUCT OVERVIEW

S2000: SWITCH,PUSH.

The SWITCH,PUSH is a EIZO industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, inclosure_type: FULLY INCLOSED, nominal_thread_size: 0.375 INCHES IN, housing_bore_diameter: 3.002 INCHES MINIMUM AND 3.006 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-291-6354, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S2000
NSN: 5330-00-291-6354
NIINs: 002916354, 005489897, 011750766, 013100527
FSC: 5330 — Packing and Gasket Materials
CAGE: 5V059 — THOMPSON INDUSTRIES (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
nominal_thread_size0.375 INCHES IN
housing_bore_diameter3.002 INCHES MINIMUM AND 3.006 INCHES MAXIMUM IN
sealing_element_styleANGULAR
end_item_identificationT-404 ENG
thread_series_designatorUNEF
terminal_type_and_quantity7 TAB, SOLDER LUG
accommodated_shaft_diameter2.000 INCHES NOMINAL IN
maximum_voltage_rating_in_volts220.0 AC
NSN5330-00-291-6354
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S2000 MFR: EIZO ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 3.002 INCHES MINIMUM AND 3.006 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.375 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER3.002 INCHES MINIMUM AND 3.006 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 1
5330002916354Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S2000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S2000?
S2000 is a SWITCH,PUSH manufactured by EIZO.
What parts can replace S2000?
There is 1 known substitute for S2000: 5330002916354. Substitute compatibility should be verified for your specific system.
What is the NSN for S2000?
S2000 is cataloged in the U.S. Government catalog under NSN 5330-00-291-6354. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S2000