PartsTable
Technical Data Sheet
Download PDF

S1565-64187 — BEARING,ROLLER,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

S1565-64187: BEARING,ROLLER,ROD END.

The BEARING,ROLLER,ROD END is a the manufacturer industrial component. Key specifications include thread_class: 3A A, bore_diameter: 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, shank_diameter: 0.5538 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN, inner_ring_width: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN, outer_ring_width: 0.8120 INCHES MINIMUM AND 0.8170 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-535-5663, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S1565-64187
NSN: 3110-00-535-5663
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 54878 — ROTAIR AEROSPACE CORP (USA)
SPECIFICATIONS
thread_class3A A
bore_diameter0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
seal_quantity2
alignment_typeSELF-ALIGNING
shank_diameter0.5538 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN
inner_ring_width0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
outer_ring_width0.8120 INCHES MINIMUM AND 0.8170 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
shank_thread_length1.8750 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM IN
lubrication_materialGREASE
self-alignment_locationINTERNAL
length_from_bore_center_to_shank_end3.3438 INCHES MINIMUM AND 3.4062 INCHES MAXIMUM IN
NSN3110-00-535-5663
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S1565-64187 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.5538 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN
•
SHANK THREAD LENGTH: 1.8750 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM IN
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.8120 INCHES MINIMUM AND 0.8170 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
ALIGNMENT TYPE: SELF-ALIGNING
•
SEAL QUANTITY: 2
•
THREAD CLASS: 3A A
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.5538 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN
SHANK THREAD LENGTH1.8750 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM IN
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.8120 INCHES MINIMUM AND 0.8170 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
ALIGNMENT TYPESELF-ALIGNING
SEAL QUANTITY2
THREAD CLASS3A A
BORE DIAMETER0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
LENGTH FROM BORE CENTER TO SHANK END3.3438 INCHES MINIMUM AND 3.4062 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
S1565-64187-000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S1565-64187?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1565-64187?
S1565-64187 is a BEARING,ROLLER,ROD END.
What parts can replace S1565-64187?
There is 1 known substitute for S1565-64187: S1565-64187-000. Substitute compatibility should be verified for your specific system.
What is the NSN for S1565-64187?
S1565-64187 is cataloged in the U.S. Government catalog under NSN 3110-00-535-5663. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1565-64187