PartsTable
Technical Data Sheet
Download PDF

S1520-65103 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S1520-65103: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, thread_class: 3A A, thread_length: 0.400 INCHES NOMINAL IN, overall_length: 4.430 INCHES NOMINAL IN, surface_finish: 100.000 MICROINCHES OVERALL, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-531-3404, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S1520-65103
NSN: 5315-00-531-3404
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
thread_class3A A
thread_length0.400 INCHES NOMINAL IN
overall_length4.430 INCHES NOMINAL IN
surface_finish100.000 MICROINCHES OVERALL
first_end_styleCHAMFERED
style_designatorSHOULDER
thread_directionRIGHT-HAND
first_step_length1.598 INCHES NOMINAL IN
shoulder_diameter0.375 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
third_step_length0.620 INCHES NOMINAL IN
NSN5315-00-531-3404
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S1520-65103 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 100.000 MICROINCHES OVERALL
•
FIRST END TAPER LENGTH: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
FIRST STEP DIAMETER: 0.437 INCHES NOMINAL IN
•
FIRST END LOCATION: SHANK END
•
THIRD STEP DIAMETER: 0.250 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
THREAD LENGTH: 0.400 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS
SURFACE FINISH100.000 MICROINCHES OVERALL
FIRST END TAPER LENGTH0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
FIRST STEP DIAMETER0.437 INCHES NOMINAL IN
FIRST END LOCATIONSHANK END
THIRD STEP DIAMETER0.250 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
THREAD LENGTH0.400 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.064 INCHES NOMINAL IN
SECOND STEP LENGTH1.437 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S1520-65103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1520-65103?
S1520-65103 is a PIN,SHOULDER,HEADLESS.
What is the NSN for S1520-65103?
S1520-65103 is cataloged in the U.S. Government catalog under NSN 5315-00-531-3404. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1520-65103