PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S1510-24492
S1510-24492 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, corner_shape: SQUARE OUTSIDE LEFT CORNER, flange_width: 0.1150 INCHES NOMINAL IN, overall_length: 0.2240 INCHES MINIMUM AND 0.2245 INCHES MAXIMUM IN, surface_finish: 100.0 MICROINCHES INTERMEDIATE LAYER, hardness_rating: 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-651-7288, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S1510-24492
NSN: 3120-00-651-7288
FSC: 3120
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
corner_shapeSQUARE OUTSIDE LEFT CORNER
flange_width0.1150 INCHES NOMINAL IN
overall_length0.2240 INCHES MINIMUM AND 0.2245 INCHES MAXIMUM IN
surface_finish100.0 MICROINCHES INTERMEDIATE LAYER
hardness_rating26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSOLID, EXTERNAL FLANGE ONE END
surface_treatmentCADMIUM OVERALL
body_inside_diameter0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
body_outside_diameter0.8200 INCHES NOMINAL IN
flange_outside_diameter1.2500 INCHES MINIMUM AND 1.2520 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-6758 COMP 4130 COND C MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN3120-00-651-7288
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: S1510-24492 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE INSIDE LEFT CORNER
•
FLANGE WIDTH: 0.1150 INCHES NOMINAL IN
•
BODY OUTSIDE DIAMETER: 0.8200 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL COMP 4130 OVERALL
•
BODY INSIDE DIAMETER: 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CORNER SHAPESQUARE INSIDE LEFT CORNER
FLANGE WIDTH0.1150 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER0.8200 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 4130 OVERALL
OVERALL LENGTH0.2240 INCHES MINIMUM AND 0.2245 INCHES MAXIMUM IN
BODY INSIDE DIAMETER0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM OVERALL
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
11655789-2Interchangeable
interchangeable cross-reference
interchangeable
1727Interchangeable
interchangeable cross-reference
interchangeable
N4559Interchangeable
interchangeable cross-reference
interchangeable
61120-P1Interchangeable
interchangeable cross-reference
interchangeable
61120Interchangeable
interchangeable cross-reference
interchangeable
2142598-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S1510-24492?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1510-24492?
S1510-24492 is a BUSHING,SLEEVE.
What parts can replace S1510-24492?
There are 17 known substitutes for S1510-24492: 11655789-2, 1727, N4559 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S1510-24492?
S1510-24492 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-651-7288. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1510-24492

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026