PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S1510-24458-2
S1510-24458-2 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, corner_shape: SQUARE INSIDE RIGHT CORNER, flange_width: 0.0900 INCHES MINIMUM AND 0.1100 INCHES MAXIMUM IN, overall_length: 0.7070 INCHES MINIMUM AND 0.7290 INCHES MAXIMUM IN, surface_finish: 100.0 MICROINCHES INTERMEDIATE LAYER, hardness_rating: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-080-7955, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S1510-24458-2
NSN: 3120-00-080-7955
FSC: 3120
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
corner_shapeSQUARE INSIDE RIGHT CORNER
flange_width0.0900 INCHES MINIMUM AND 0.1100 INCHES MAXIMUM IN
overall_length0.7070 INCHES MINIMUM AND 0.7290 INCHES MAXIMUM IN
surface_finish100.0 MICROINCHES INTERMEDIATE LAYER
hardness_rating34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSOLID, EXTERNAL FLANGE ONE END
surface_treatmentCADMIUM OVERALL
body_inside_diameter0.9120 INCHES MINIMUM AND 0.9320 INCHES MAXIMUM IN
body_outside_diameter1.0640 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM IN
flange_outside_diameter1.6094 INCHES MINIMUM AND 1.6406 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-6758 COND C MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN3120-00-080-7955
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: S1510-24458-2 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE INSIDE LEFT CORNER
•
STYLE DESIGNATOR: SOLID, EXTERNAL FLANGE ONE END
•
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 COND C MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
CORNER SHAPEROUND OUTSIDE RIGHT CORNER
SURFACE FINISH100.0 MICROINCHES INTERMEDIATE LAYER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 COND C MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
MATERIALSTEEL COMP 4130 OVERALL
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
SSR271S6709-958411REVCPC14Interchangeable
interchangeable cross-reference
interchangeable
A1536Interchangeable
interchangeable cross-reference
interchangeable
XW6Interchangeable
interchangeable cross-reference
interchangeable
GPW18390BInterchangeable
interchangeable cross-reference
interchangeable
7521710Interchangeable
interchangeable cross-reference
interchangeable
A17401Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S1510-24458-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1510-24458-2?
S1510-24458-2 is a BUSHING,SLEEVE.
What parts can replace S1510-24458-2?
There are 8 known substitutes for S1510-24458-2: SSR271S6709-958411REVCPC14, A1536, XW6 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S1510-24458-2?
S1510-24458-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-080-7955. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1510-24458-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026