PartsTable
Technical Data Sheet
Download PDF

S1510-23074 — NUT,PLAIN,CAP

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S1510-23074: NUT,PLAIN,CAP.

The NUT,PLAIN,CAP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, nut_height: 1.312 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNS, thread_direction: RIGHT-HAND, nominal_thread_size: 1.063 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-335-5215, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S1510-23074
NSN: 5310-00-335-5215
FSC: 5310 — Nuts and Washers
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
nut_height1.312 INCHES NOMINAL IN
thread_class3B
thread_seriesUNS
thread_directionRIGHT-HAND
nominal_thread_size1.063 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch16
material_document_and_classificationMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-335-5215
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S1510-23074 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNS
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.063 INCHES IN
•
NUT HEIGHT: 1.312 INCHES NOMINAL IN
•
THREAD CLASS: 3B
•
THREAD QUANTITY PER INCH: 16
•
MATERIAL: STEEL COMP 4130 OVERALL
TECHNICAL CHARACTERISTICS
THREAD SERIESUNS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.063 INCHES IN
NUT HEIGHT1.312 INCHES NOMINAL IN
THREAD CLASS3B
THREAD QUANTITY PER INCH16
MATERIALSTEEL COMP 4130 OVERALL
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy S1510-23074?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1510-23074?
S1510-23074 is a NUT,PLAIN,CAP.
What is the NSN for S1510-23074?
S1510-23074 is cataloged in the U.S. Government catalog under NSN 5310-00-335-5215. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1510-23074