PartsTable
Technical Data Sheet
PartsTable / O-RING / S1461
S1461 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FILTER ELEMENT,FLUID is a the manufacturer industrial component. Key specifications include material: PAPER CONTAINER/CARTRIDGE, design_type: NONREUSABLE, temp_rating: 200.0 FAHRENHEIT NOMINAL DEGF, body_diameter: 6.000 INCHES NOMINAL IN, flow_direction: OUTSIDE IN, special_features: FURNISHED W/2 SYNTHETIC RUBBER GASKETS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-860-2119, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S1461
NSN: 5331-00-860-2119
FSC: 5331 — O-RING
CAGE: 25567 — THE GORMAN-RUPP COMPANY DIV GORMAN-RUPP (USA)
SPECIFICATIONS
materialPAPER CONTAINER/CARTRIDGE
design_typeNONREUSABLE
temp_rating200.0 FAHRENHEIT NOMINAL DEGF
body_diameter6.000 INCHES NOMINAL IN
flow_directionOUTSIDE IN
special_featuresFURNISHED W/2 SYNTHETIC RUBBER GASKETS
style_designatorCYLINDRICAL W/ CONTAINER (RIGID)
body_overall_length14.750 INCHES NOMINAL IN
body_inside_diameter3.500 INCHES NOMINAL IN
center_hole_diameter0.750 INCHES NOMINAL IN
differential_pressureERR-060
cross-sectional_height0.062 INCHES NOMINAL IN
NSN5331-00-860-2119
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S1461 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.750 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
SP614FDInterchangeable
interchangeable cross-reference
interchangeable
A1809Interchangeable
interchangeable cross-reference
interchangeable
PLS-614Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S1461?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1461?
S1461 is a FILTER ELEMENT,FLUID.
What parts can replace S1461?
There are 3 known substitutes for S1461: SP614FD, A1809, PLS-614. Substitute compatibility should be verified for your specific system.
What is the NSN for S1461?
S1461 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-860-2119. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1461

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026